Home Company Info Product List Contact Details
Homeproduct Directory

PVC General Engineering Plastics

PVC General Engineering Plastics
company Guangzhou Engineering Plastics Industries Co., Ltd
Categories LED Displays
Update2011-04-11
Original RegionChina
PVC General Engineering Plastics
Model
PVC
Description
PVC, transparent / gray / yellow PVC aka PVC resin, has a non-crystallized property, and transformable when heated. PVC is one of the five most broadly used resins; it has an inseparable relation with our life. Depending on the usage, it can be categorized into two main types: soft and hard. Hard type is mainly used in water pipes, and plastic flooring. Soft type is mainly used in toys, synthetic leather, and gloves. In using PVC as thin films, the most widely used is plastic cloth in agriculture industry. The insulation material that covers the electric wires is a type of soft PVC and is used mostly. PVC offer high strength and stiffness. Its temperature range is between 00 to 600C. PVC also displays good resistance when exposed to organic and inorganic chemicals as well as oxidizing media.
Characteristics
The main characteristics of PVC are:
  • Tough
  • Very low water absorption
  • Good chemical resistance
  • Easily thermoformed
  • Very good electrical insulation
  • Easy to bond
  • Easily welded
  • Economic
Projects

1. Electronics: electric wire cover, electric pipe insulation material, tape, electric wire.
2. Machinery: car-seat cushion, chemical plant pipes, and car parts.
3. Construction: water pipe, soft pipe, hard pipe, window frame, board, flooring, roof material, and heat insulation material.
4. Articles of Daily Use: purse, belt, plastic shoes, tablecloth, clear bottles, and phones.
5. Other: blow dryer, shoe-making, plastic bottle, toy, agriculture-use film, painting material, and pill wrapping case/sheet.
6. Printing electroplating use

Performance indicators
Properties
Unit
Test Method DIN ASTM
Result
Mechanical
-
-
-
Density
g/cm
53479
1.43
Tensile strength at yield
MPa
53455
50
Tensile strength at break
MPa
53455
-
Elongation at Break
%
53455
20
Modulus of elasticity in tension
MPa
53457
3000
Modulus of elasticity in flexure
MPa
53457
-
Ball indentation hardness
MPa
53456
130
Impact strength (Charpy)
KJ/m
53453
-
Creep rupture strength after 1000 hours with static load
MPa
-
-
Time yield limit for 1% elongation after 1000 hours
MPa
-
0.6
Coefficient of friction against hardened and ground steel p+0,05 N/mm2, v=0,6 m/s
-
-
-
Wear conditions as above
m/km
-
-
Thermal
-
-
-
Crystalline melting point
C
53736
-
Glass transition temperature
C
53736
70
Heat distortion temperature method A
C
ISO 75

PVC General Engineering Plastics on sale

Products Showcase

See more products from this supplier.

Do you want to show products of your own company? Join FREE now!

You may also be interested in: